Dillon Precision 10443 - XL650 Machine Cover

Dillon Precision 10443 - XL 650 Machine Cover This packcloth nylon machine cover comes equipped with a D-ring, allowing the heavy-duty zipper to be locked. Covers XL650 with or without the case feeder attached. Additionally, use this cover for the RL550...

Dillon Precision - 550 Machine Cover

Dillon Precision - 550 Machine Cover   This great looking nylon cover adds security to your loading bench. Your reloader will be protected against more than dust as these covers come with a D-ring that allows the heavy duty zipper to be locked...

Dillon Precision - Low Powder Sensor

Dillon Precision - Low Powder Sensor Provides an audible and visual reminder when it's time to refill your powder reservoir. When the powder level drops to about 1000 grains, a buzzer will sound and a bright LED will light.    

Dillon Precision - CaseFeed Plates

Dillon Precision - Case-feed Plates These case-feed plate are for the Dillon Precision Case-feed Assembly. This is just the plate that goes inside so you can feed different sized brass. 21072 Used for 38 Special/357, 40 S&W, 10mm and larger...

Dillon Precision - Rapid Polish 290 (8 oz.)

Dillon Precision - Rapid Polish 290 (8 oz.) SHINE? You bet your brass! Dillon Precision has developed another exciting new product to make your reloading faster and easier. Rapid Polish 290 is the first cartridge case finish designed specifically to...

Dillon Precision - Case Lube (8 oz.)

Dillon Precision - Case Lube (8 oz.)   Rapid Lube 5000, Dillon's aerosol cartridge case lubricant, has been replaced by an "environmentally correct," non-aerosol case lube. It works the same: Simply lay your cases out, spray lightly with one or...

ShockBottle - 100-round case gauge

ShockBottle - 100-round case gauge If you are a serious shooter, you are probably a serious reloader. If you are serious about reloading, then you probably own a case gauge. If you have done enough case gauging, then you know that case gauging sucks...

Dillon Precision - 550 Converion Kit

Dillon Precision - Conversion Kit   Includes shellplate, powder funnel, and locator buttons for the Dillon 550. available in all calibers; please specify caliber desired. 

Dillon Precision - 3 Die Set

Dillon Precision - 3 Die Set   Sizing/Depriming Die Our sizing/depriming dies feature a unique "floating decap assembly" with a snap spring that throws the spent primer off the pin and eliminates the problem of primer "draw back" that often...

Dillon Precision - RL 550 / XL 650 / XL 750 STRONG MOUNT

Dillon Precision -  RL 550B Strong Mount   This mount is for both the Rl550 and RL550B, as well as the XL650.Mount height 8 1/2"

Dillon Precision - Bullet Tray Kit

Dillon Precision - Bullet Tray Kit   Mounts directly to Strong Mount. Fits the Square Deal, RL550 series and XL650 strongmounts. For 1050 machines use #22215. You must have a strongmount in order to use this bullet tray.

Dillon Precision - Small primer Pickup Tubes

Dillon Precision - Small primer Pickup Tubes   The secret of really punching out a lot of rounds in a hurry. Have these tubes filled and ready to go. These are for small diameter primers

Dillon Precision - XL 650 Tool Head

Dillon Precision - XL 650 Tool Head   This is the Dillon XL 650 Tool head. make for easily changing the caliber that you want to start reloading next while keeping your dies in proper placement.

Dillon Precision - Powder Funnel B (.30 Caliber)

Dillon Precision - Powder Funnel B (.30 Caliber)   Powder funnels to activate the Dillon automatic powder system. "B" size is for .30 caliber.

Dillon Precision - Powder Die

Dillon Powder Die   Extra powder dies allow you to move your powder measure from toolhead to toolhead without changing the "belling" adjustment.Toolhead not included. These are for the RL550, XL650,and RL450 equipped with the automatic powder...