JP Enterprises - Competition Compensator 1/2x28 .223

Competition Series Compensator 1/2-28 TPI.750 OD.281 exitMatte black Let's face it, comps are easy to make. Perfecting them is the hard part. Our original Recoil Eliminator will always be the...

JP Enterprises - Silent Captured Spring for AR15 Rifles Standard Weight Gen 2

The “spoon over a cheese grater” sound emitted by modern sporting rifles whenever they’re charged or fired has always been one of the AR platform’s ugly blemishes and one...

JP Enterprises - 5/8x24 Double Crush Washer

5/8-24.750 ODBlack or Stainless Steel Finish We've been installing comps with crush washers since the debut of the original Recoil Eliminator. Every one has been a pain to work with and little...

JP Enterprises - 1/2x28 Double Crush Washer

1/2-28.750 OD Black or Stainless Steel Finish We've been installing comps with crush washers since the debut of the original Recoil Eliminator. Every one has been a pain to work with and little...

JP Enterprises - Enhanced Gas Ring for .308 Bolts

As a replacement for traditional three-piece gas rings, the JPEGR-308 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings...

JP Enterprises - Enhanced Gas Ring for .223 Bolts

As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings...

JP Enterprises - Reduced Power Spring Kit

JP - Reduced Power Spring Kit   You can acheive significant improvement over stock parts by using a set of custom trigger/hammer springs. JP Reduced Power Spring Kit, yeilds about 4 to 4.5 lbs...

JP Enterprises - AR-15 Anti-Walk Triggers Pins JPAW-1

JP - AR-15 Anti-Walk Triggers Pins JPAW-1   JP Oversize Anti-Walk Pins are the icing on the cake. Removing all the slop between the trigger, hammer, pins and the receiver results in that extra...

JP Enterprises - Trigger Hammer Spring Set

JP - Trigger Hammer Spring Set   JP EnhancedReliability Spring Kit, 3.5-4.0 pound trigger pull with JP fire control parts. If you can't quite pop for our complete trigger kit, or have too...