JP EnhancedReliability Spring Kit, 3.5-4.0 pound trigger pull with JP fire control parts. If you can't quite pop for our complete trigger kit, or have too many rifles and can't justify expensive triggers in all of them, then this may be for you. You can achieve a significant improvement over stock parts by using a set of our custom trigger/hammer springs and the Rydol sear compound. With proper sear and hammer notch preparation, a livable 4.5 to 5.0 smooth trigger in a rifle with standard trigger components is possible. It will not have the extremely short engagement/over travel feel like the JP trigger, but you will have a smooth "roll-off" feel that will give usable trigger control. The spring kit includes trigger, hammer and disconnector spring and complete instructions on how to prep your parts for best results
Kit includes yellow trigger spring, red hammer spring and disconnector spring
To be used only with JP trigger parts.
Will not yield substantial change on standard AR-15 trigger components.
Not to be used for military or law enforcement applications.
Recreational or competition use only
May cause ignition failures with some types of ammunition with low sensitivity primers.